If you notice that your Xiaomi, Redmi, or POCO with HyperOS isn't running as smoothly as it did when you first bought it, don't worry: it's more common than you might think. Over time, files, background processes, and minor bugs accumulate, making the system seem sluggish. heavier, slower, and less fluideven though the hardware remains perfectly valid.
The good news is that you don't need to be an expert or install strange apps to give your phone a boost. HyperOS hides a ton of functions and settings allowing Boost performance in HyperOSReduce lag, increase FPS in games, improve system responsiveness, and even extend the lifespan of your internal storage. Below you'll find a comprehensive, step-by-step guide with all these tricks clearly explained.
Restart your mobile device and perform basic initial performance adjustments
Before we delve into more advanced options, it's best to start with the simplest: a hard reset the phoneIf you haven't turned it off for weeks or months, it's very likely that processes, background services, and minor glitches have been left hanging, affecting overall performance.
Restarting clears many of these processes at once, resets system services, and the phone regains some of its lost speed. It's a very basic action, but You may notice an immediate improvementEspecially if it's been a while since you last did it. Ideally, you should restart when you notice something is wrong, or at least every few months.
In addition to restarting, it's important to check if you have many apps open in the background, constant notifications, or unnecessary widgets. Although HyperOS manages resources quite well, The fewer things that are active at the same time, the better.The more resources the CPU and RAM have, the more you'll need for what really matters.
Enable high-performance mode in HyperOS
One of the most direct ways to make your phone run more smoothly is to use the high performance mode which includes HyperOS. This power profile prioritizes processor and GPU power over battery saving, resulting in a faster feel across the board: opening apps, switching between them, playing games, etc.
To activate it on your Xiaomi, Redmi, or POCO device, the process is usually very similar, although the name of some menus may vary slightly depending on the version of HyperOS installed. On most models, simply follow these steps:
- Go to System Settings.
- Access the section Battery or Battery settings.
- Look for the "Current Mode" or power profile section.
- Choose High performance mode and confirms the warning that consumption could increase.
With this setting enabled, the system stops limiting the processor and GPU frequency so much, so The animations feel more fluid. And demanding games and apps run with less lag. There is an impact on battery life, but in many modern models it only means charging an hour or two earlier than usual.
If you're worried about battery life, you can use this mode only when you're going to play games or need maximum performance; to find out how Protect the battery in HyperOS To mitigate wear and tear, review the specific recommendations. When you're finished, simply return to balanced mode to to recover better consumption during the rest of the day.
Increase (or disable) virtual RAM in HyperOS
Another key feature that HyperOS offers is the RAM memory expansion, also known as virtual RAM. This feature uses part of the internal storage as if it were additional RAM, which can help when you have many applications open or your phone's physical RAM is insufficient.
However, all that glitters is not gold. Using internal memory as RAM consumes storage space and performs more reads and writes, so if you're running low on free gigabytes, It can even worsen overall performance.That's why it's important to consider whether it's worth it for you or not.
To adjust the virtual RAM on your HyperOS device, you will typically need to do the following:
- Open Settings.
- Walk into Additional adjustments.
- Find the option called Memory extension or similar.
- Choose between disabling it or selecting the amount of extra RAM you want to add (depending on what your model allows).
If your phone has plenty of free storage and a somewhat limited amount of physical RAM, activating this feature and increasing the amount can help. make multitasking more stableThis results in fewer app reloads when switching between them. However, if your storage is almost full, it might be better to disable it so the system can breathe and run more smoothly.
A good practice is to try using the extended RAM for a few days and then not, observing whether you notice any changes in smoothness, multitasking, and stability. Depending on your specific usage, it might make a significant difference, or it might be better to do without it. prevent it from taking up important space.
Clean up junk files from your phone and create cleaning shortcuts
Over time, your phone accumulates caches, temporary files, remnants of uninstalled apps, and other elements that serve no purpose but take up space and can slow down the system. Fortunately, HyperOS offers several ways to clean up all this “trash” safely.
You can do it from the system's Security app or using tools like Google Files, but a very convenient option is to place cleaning shortcuts on the home screen, so you can press a button and optimize your mobile in seconds.
To create these shortcuts in HyperOS, the steps are usually as follows:
- Go to Settings.
- Enter the Applications section.
- Press on System Application Settings.
- Search the app Security.
- Access "Common Shortcuts".
- Activate the options Clear, "Deep cleaning" and/or "Cleaner".
After doing so, you'll see new icons appear on your home screen. You can move them to a more convenient location so that when you notice your phone is running slowly, you can simply tap the shortcut and delete temporary files and debris in a moment.
If you don't want to clutter your desktop with extra icons, remember that the Security app includes these cleaning tools. Use them regularly, for example every week or every two weeks. It helps keep the system lightweight. and with enough free storage to work smoothly.
Defragmenting and optimizing storage in HyperOS
With the arrival of HyperOS 3, Xiaomi has incorporated a very interesting feature called "storage update"which in practice performs a defragmentation or optimization of internal data so that the system can access them more efficiently.
With daily use, installing and uninstalling applications, updating the system, or moving files, storage becomes "disorganized." Information is scattered in small fragments that can increase access times. This tool helps the system reorganize those data blocks, slightly improving loading times and overall fluidity.
It's not a magic feature, nor will it transform an old phone into a new one, but it can make a difference on heavily used devices or those with a lot of accumulated wear and tear. To access this defragmentation feature in HyperOS, you typically need to do the following:
- Open Settings.
- Sign in Over the phone.
- Click on the section Storage.
- Scroll down to "Storage Optimization".
- Sign in Storage update.
- Tap on "Defragment" and wait for the process to finish.
While defragmentation is running, it is recommended not using the mobile phoneThe process may take a few minutes and involves accessing internal system data. Once complete, you can resume using your phone normally, with a possible slight improvement in app opening speed and stability.
There's no need to overuse this function; running it periodically, especially if you notice performance dropping or storage getting quite full, is usually more than enough. prevent the mobile phone from aging worse than necessary.
Speed ​​up HyperOS animations to gain a greater sense of speed
HyperOS includes numerous animations when opening and closing applications, returning to the home screen, or navigating menus. They're attractive and create a sense of fluidity, but they also consume CPU and GPU resources. Reducing their duration can help you... make everything seem much faster without touching the hardware.
Many devices running HyperOS offer a direct setting to adjust the animation speed of the launcher and home screen. The most common procedure is as follows:
- Go into Settings.
- Accede to Starting screen.
- Look for the "Animation Speed" section.
- Select option Quick to shorten the transitions.
By doing this, you'll still have animations, but they'll be shorter and the system will feel more responsive. This, combined with other settings like high-performance mode, can to significantly change the feeling of agility of the phone in everyday life.
If you want to take it a step further, some versions allow you to adjust animation scales from the developer options, but this isn't recommended for inexperienced users. Simply using the native home screen settings will give you a noticeable improvement without much hassle.
Disable MSA and System Daemon to reduce bloatware and gain FPS
Xiaomi's interface, whether MIUI or HyperOS, is quite optimized, but it also includes a certain amount of bloatware and background services which are not always necessary. Among them, two stand out that, when disabled, can help improve performance and save battery: MSA and System Daemon (or Miui Daemon in some models).
MSA (MIUI System Ads) is the service that manages some of the advertising that appears in system applications. System Daemon, on the other hand, handles data collection, analysis, and other processes that are not essential for the average user. Having them active implies CPU, RAM and power consumption constantly.
To disable them from the HyperOS settings, there is usually a path similar to this:
- Go to Settings.
- Accede to Fingerprints, face data and screen lock (the name may vary slightly depending on the version).
- Go to "Authorization and revocation" or "Automation and revocation".
- In the system's list of services, locate msa y System Daemon (or Miui Daemon).
- Deactivate both services using the corresponding switch.
It's possible that when you try to disable MSA, it will fail on the first attempt, or the system will display a warning asking you to try again. This is a common tactic to discourage users, but after trying a couple of times, you might be able to disable it. It can usually be disabled without problems.
Once this procedure is completed, it is advisable reboot the device For the changes to be applied correctly, you'll notice fewer active background processes, less heat from your device, slightly longer battery life, and a slight improvement in overall smoothness, especially in games where every FPS counts.
There are more advanced ways to disable system services through developer options or even with ADB tools, but these aren't recommended for most users, as tampering with the wrong settings can cause instability. Simply disabling MSA and System Daemon is sufficient. a good balance between performance and safety.
Increase the refresh rate and activate game modes
Another way to improve the feeling of smoothness in HyperOS is to take full advantage of the screen refresh rateIf your phone supports 90 Hz, 120 Hz or more, it's a good idea to check that it's set to the highest value, as many models come by default in automatic mode or at 60 Hz to save battery.
You can change this parameter in the display settings. Selecting a higher refresh rate will make the interface much smoother when scrolling through menus, social media, or compatible games. In return, battery consumption will increase slightly, but combined with the optimizations mentioned earlier, the overall experience clearly improves.
If you enjoy gaming, don't forget to take advantage of tools like Game Turbo (or its equivalent in HyperOS). This mode typically prioritizes network bandwidth for gaming, improves touch response, and reduces intrusive notifications, as well as managing system resources to give the game priority.
With a clean system, fewer unnecessary processes, active performance mode, and a good refresh rate, you'll be able to Get the most out of your Xiaomi hardwareboth in demanding titles and in daily use of the system.
Clear the launcher cache to restore smooth performance on Xiaomi, Redmi, and POCO devices.
As you install and uninstall apps, change icons, widgets, and backgrounds, the system launcher (the app that manages the home screen and app drawer) accumulates cache and temporary data which are not essential. This can cause the animations to not run as smoothly as at the beginning or cause slight stuttering when returning to the start.
The good news is that clearing the launcher cache in HyperOS is completely safe: it doesn't delete your photos, videos, or personal data, nor does it remove your phone's basic settings. It simply gets rid of files that are no longer needed and that hinder smooth operation. On most Xiaomi phones, the process is as follows:
- Open the Settings app.
- Enter the section Applications or "Application Management".
- Search the app System launcher (System Launcher).
- Click on “Storage”.
- Select option Clear cache.
- Restart the phone.
After this simple step, you'll often notice that transitions are smoother, apps open with less lag, and the desktop responds more quickly. It's a trick you can repeat every month or two to Keep HyperOS in good shape without touching anything dangerous.
On Redmi devices, the method is practically the same, and in many cases the effect is even more noticeable, especially on mid-range and low-end models that suffer more from the accumulation of temporary files. Clearing the launcher cache helps to... The interface no longer feels heavy. after several updates.
In the case of POCO, the only thing that changes is the name of the launcher. Instead of "System Launcher," you'll have to look for POCO Launcher Within the list of applications and in its storage, also clear the cache. After restarting, the phone regains considerable speed, which is especially useful if you've had the same device for a long time or have gone through several versions of HyperOS.
Keep HyperOS optimized in the long term
These adjustments aren't things you need to do every day, but it's worth setting up a small routine maintenanceEvery so often you can restart your phone, run the junk cleaner, check if virtual RAM is right for you, launch the storage defragmentation tool, and clear the launcher cache. With these periodic actions, You will prevent the system from degrading more than necessary..
If you add to that disabling unnecessary services like MSA and System Daemon, configuring high-performance mode at key moments, adjusting the refresh rate, and using Game Turbo for games, you'll have a much more balanced device. In most cases, lag and stuttering problems stem more from software and data accumulation than from insufficient hardware, so Taking care of HyperOS makes all the difference.
By combining all the tricks above, from the most basic to the most advanced, it's perfectly possible to make your Xiaomi, Redmi, or POCO feel very close to new again, with smooth animations, apps that open instantly, less heat, and reasonable battery life even when using performance mode when you need it.
